LED Low Bay Lights

Low bay lighting is a solution for spaces with high ceilings, where bright and uniform illumination is needed over a large area. It is typically used in commercial spaces such as factories, warehouses or retail stores, where ceilings are high enough to require that the light level is lowered. This is generally over roughly 3m. For ceilings over 5m, high bay lighting is recommended.

Our LED low bay lights are a durable and low-maintenance alternative to fluorescents, Metal Halides or HPS (High Pressure Sodium) lights, which all have drawbacks such as long warm-up times, UV and infrared radiation and energy inefficiency.

LEDs deliver an excellent quality of light, with a range of colour temperatures available. Their extremely long lifespan means maintenance is minimal and low cost. They are highly energy efficient and produce a 180 degree spread of light with very little spillage and therefore wasted energy. They turn on and off instantly with no warm up or cool down time, which again minimises energy usage. LEDs also produce minimal heat, which is particularly beneficial in a temperature-controlled or sensitive environment.

Colour Temperature

Colour temperature refers to the appearance of the light produced by a light source. The temperature is measured in Kelvin (K). Colour temperatures below 5000K are ‘warmer’ colours and light contains more red or yellow tones. Over 5000K, temperatures are ‘cool’ and are more blue in tone.

Mounting Methods

Suspended
Suspending low bay lights on chains allows for the light level to be lowered to where it’s needed. Suspending the lights ensures that sufficient light reaches the ground.

Surface Mounted
Low bay lights are typically suspension mounted, but in cases where the ceiling is low enough, the suspension chains may be very short (for example just 10cm), giving the appearance of surface mounting.

Applications

Low bay LED lighting suits a variety of commercial applications, with benefits including energy efficiency, long lifespan and minimal maintenance requirements. Below are some of the environments where low bay lighting is an optimum solution.

Warehouses & Factories

Warehouses and factories are the most common applications for low bay lighting given the need to spread light evenly over a very large area. Warehouses with high shelving, in particular, need light which is mounted high enough to be distributed without being blocked, as this creates shadows. These businesses also often have 24-hour operations making LEDs a more economical choice as they are energy efficient and require little maintenance. 

Garage & Workshop

Garages and workshops typically need bright light to carry out detailed, intricate work. Colour rendering may also be important for matching bodywork, a consideration which can be accommodated with a high CRI LED. CRI stands for ‘colour rendering index’ and indicates how accurately a light source renders colour. A CRI of over 90 is considered excellent.

Indoor Basketball / Sports Stadium

Sports stadiums require an even, bright spread of light to ensure participants and spectators have a clear view uninterrupted by glare or shadows. Choosing a light without flicker is also important for comfort.

Gyms

Gyms need bright illumination without glare or shadow. LED low bay lighting produces minimal heat, which is a benefit in a gym environment. It avoids creating more heat in an air-conditioned space. Low maintenance also means there is little down time when facilities are not accessible.

Retail Stores

Low bay lighting can provide an industrial feel in retail stores, which need a solution with no warm up time that provides clear and uniform light. High CRI is important to represent the colour of products accurately and at their most vibrant. Reliability and maintenance are also key considerations when ceilings are beyond easily accessible reach. 

Replacements

Technologies

Large commercial spaces have typically been lit using options such as Metal Halide (MH), High Pressure Sodium (HPS) or fluorescent lights. These technologies all come with drawbacks, which are addressed by modern LED options.

HPS (High Pressure Sodium)

HPS lights have a narrow colour spectrum, producing a very yellow light, and poor CRI. They take time to warm up and can flicker and come on and off at the end of their life. They are not as energy efficient as LEDs, due to the ‘wasted’ spread of light they produce, and energy lost through heat emissions created. HPS lights are fragile and more prone to breakage and failure, and in the worst case the glass bulb can fall from the ceiling. They contain hazardous materials meaning they need special disposal.

MH (Metal Halide)

Metal halides produce a 360 degree spread of light which must be reflected and redirected, which results in light ‘spillage’. This, plus their long warm up time, makes them inefficient. Metal Halides produce higher heat emissions as well as infrared and harmful UV radiation. They are fragile and prone to breakage and failure, and the hazardous materials they contain mean that specialist disposal is required at the end of their life. 

Fluorescent 

Fluorescent lighting has typically been used in many commercial applications, however they have a number of issues. Older fluorescent lights had a long warm-up time and also emitted a buzzing sound. As with HPS and MH options, fluorescents scatter light in a 360 degree spread around the bulb which is inefficient. They produce UV radiation and also contain toxic materials, so require special disposal. Fluorescents can also cause health issues including acting as a trigger for migraine

Additional Information

What wattages are available?

The wattage required depends on a combination of factors including the type of space (warehouse, gyms, retail stores, etc.), the ceiling height and the nature of the building. We have a range of wattages available and can advise on the best option:

• 60W
• 80W
• 100W
• 120W
• 150W

What shapes do the lights come in?

As a standard, the low bay lights come in a circular form. If you are looking for a more traditional look, we can custom order/produce cone/head shaped designs.

What is the price for low bay LED Lights?

Price ranges from $160 – $300 per unit.

What globes does LED low bay lighting use?

High powered long lasting LED Chips from top brands. 

Do you offer wholesale?

Yes, these are a wholesale product with MOQ of 5 units. Sample upon request.